Workplace Monitoring

What is Workplace Monitoring?

Workplace monitoring is process in which auditing of work area which maintains temperature, humidity, illumination and required numbers of air changes. People spend their one third time in workplace it is necessary to keep it pleasant so that it will increase their efficiency.  There are three types of Monitoring required in Workplace Monitoring in places such as Factories, mines etc. which are Indoor Air Quality, Noise measurement and Hazardous gases & chemicals.

Air Sampling for Dust in Workplace Monitoring

In this sampling, Respirable Dust Sampler is used to identify quantity of dust present in working place of industry. This particulate pollutant/Dust is trapped on filter media & analysis is done in laboratory.
Trapped Dust is measured with the help of following formula:

SPM = (Final wt. of filter paper – Initial wt. of Filter paper) * 10-6 / Total Air Passed

Air passed = ((Initial Air + Final Air) + T) / 2
T= Time of sampling, min

Two types of samples are taken into consideration viz. PM10 i.e. Particulate Matter less than 10 micron meter & PM2.5 i.e. Particulate Matter less than 2.5 micron meter. SO2, NOx also measured in this Process. For more info visit Indoor air Quality

Read more about Air quality Sampling and Indoor Air Quality (IAQ)

Workplace Air Monitoring

Workplace air monitoring is process to measure pollutants present in air at workplace. It helps us to identify sources of pollutants and to evaluate efficiency of existing or newly installed or implemented control measures.

Workplace air monitoring can be conducted by using High Volume Respirable Dust Samplers, Indoor air quality monitor, Handy sampler etc.

Noise Level Measurement

Ambient & Location/Workplace wise Noise level reading can be taken during day time & night Time as per requirement. if Readings are high then below mentioned points may help to reduce noise levels.

  • Replace machineries parts which are causing noise
  • Relocate Machines to areas where no employee or workers or fewer.
  • using lining guards or noise damping material
  • Fitting anti vibration mountings
  • Putting silencers to exhaust systems
  • if Noise level exceeds 90dB then employees should wear headphones
  • Noise hazards can be reduced by reducing overlapping of shifts.

Hazardous Gases & Chemicals MonitoringWorpkplace Monitoring

Sampling of Hazardous & Chemicals is taken into consideration in Workplace monitoring which is potentially hazardous to Human Health. It means that, if any Hazardous gases & chemicals or vapors, mists being reacted or stored, then its concentration outside the reactor or storage area should be within permissible limits that it could not affect the human health.

Do you know how we conduct Ventilation Survey? Read more here

Illumination Monitoring

We do Illumination audit to check whether workplace is over or under illuminated and provide suggestions to get optimum illumination.

Read more about Illumination Monitoring.

Ideal Workplace to work..

It is Important to know about workplace as if it is well maintained air flow, light, calm etc. It can increase efficiency and concentration of employees.

Just have a look at below mentioned workplace “who wouldn’t want to work there?”Ideal Workplace

We love to do this by monitoring quality of air, illumination, sound and help to remove any unwanted accumulation to keep office fresh. 🙂

If you want to know more please fill up contact form mentioned on right side.

Perfect Pollucon Services