VOCs are gases that are emitted by certain liquids and solids. VOCs are bad for health, some have short term while others have long lasting ill-effects. To make matters worse, VOC concentration are 10 times higher indoors than outdoors and several products that are easily available in the market emit this harmful compound. VOC monitoring is the process of testing volatile Organic Compounds in environment.
Ingredients required to make household products like paints, wax and varnishes contain VOCs, also cosmetic, disinfecting and cleaning products are found laced with VOCs. All of these products emit harmful gases while using or storing them. A study conducted by Total Exposure Assessment Methodology (TEAM) found the levels of organic pollutants significantly higher indoors, and it didn’t matter whether the house was located in rural or highly industrial areas.
Read more about Importance of Air Quality Monitoring
A hazardous observation is that the organic pollutants emitted by these household products can persist in the air long after the activity is concluded.
Several household products emit organic pollutants, some of them are –
As you can see, mostof the products are utilized by us on a daily basis and we have no knowledge its adverse effects on our health. VOCs can cause several conditions that are detrimental to one’s health, some of they are –
These were the health effects, following are some signs and symptoms to look out for –
Health effects caused by organic chemicals are mainly dependent on its toxicity level and the amount of time the person has been exposed to VOCs. Some immediate symptoms to high levels of exposure include –
Learn More about Stack Emission monitoring
There are 2 widely used methods to VOC Monitoring or testing.
These technologies are –
Flame Ionization Detectors (FIDs) – FIDs use a hydrogen flame to ionize the VOC. The FIDs can be burdensome to move around the designated work area as it requires a hydrogen cylinder to provide gas. In order not to receive inaccurate readings, a heated sample line should be used when extracting VOCs from the exhaust shaft, this will prevent the VOCs from condensing and giving you an accurate result.
Photo Ionization Detectors (PIDs) – The working of the PIDs and the FIDs are the same, except the former uses ultra-violet light to ionize VOCs. Another important aspect of PIDs are that they eliminate Methane while measuring VOCs, this ensures that any background levels of methane in the atmosphere can be neglected in the final reading.
Monitoring of VOC levels are imperative as if left unchecked, prolong exposure can cause damage of several internal organs and low level exposure can cause severe problems in the long run. VOC monitoring & Testing can be done using specific designed instruments, they come in different sizes, these instruments are portable or can be fixed and is apt to monitor the organic pollutant levels in your home or/and office space.
Any type of Gas detection systems play very important role in safety of employees at chemical plants, laboratories and ETPs. Since it takes no time to deteriorate the environmental and human health once it is exposed to VOC, hence it is very important to know in case of leakage or accidents at real time to save lives.
Some of them are capable enough to accurately measure event smallest quantities of VOC present in ambient air at ppb level.
Most of the Continuous VOC monitoring devices available in market are using photoionisation detection (PID) technology to measure concentration of various VOC compounds like Benzene, etc. This PID technology allows sensors to detect VOC even at low concentrations.
In short, PID detector had ultraviolet lamp which emits photons. When the compound absorbs the Photons released by lamp it makes electrons to leave and creates positive ions. Ions are collected on electrodes and current generated by it gives the measure of the compound. benefits of PID technology is cost effective, easy to use, real time measurement and can detect very low concentrations as well.
Read more about Air quality monitoring for home or office
Also read How to reduce air pollution from industries
If you adhere to the above mentioned pointers then the chances of exposure to VOCs are extremely low. VOCs are bad for you, your children and your pets, it’s reported that immediately after certain activities such as paint stripping, organic pollutants shoot up to a thousand times than the background levels. Imagine the amount of damage these toxic levels of VOCs can do to your body, it’s paramount that you monitor and measure the levels of organic pollutants either by using the detectors or by hiring professional services. Trained professionals know the exact methods of VOC monitoring & Testing and will ensure that they are under control in your home or/and office space.
Perfect Pollucon Services Offers Services in Volatile Organic Compounds Testing and Monitoring for homes and offices.
Perfect Pollucon Services is known as an expert in VOC Testing for homes and offices. Contact our experts now if you want to check VOC levels for your home of office.
VOC Monitors can detect small changes in specific gases and send the data to the central monitoring system. Also, some companies periodically check VOC using portable machines to monitor VOC Levels on premises.
Volatile Organic Compounds (VOC) are various harmful chemicals that are found in many products used in building and maintaining things around us. They are emitted into the air we breathe in a process known as ‘Off-gassing’.
To Monitor VOC, there are mainly 3 types of methods i.e. Continuous, Discontinuous or on-site. The other techniques include flame ionisation detectors (FIDs), catalytic oxidation, and infra-red techniques (IR) such as infrared spectroscopy.
Volatile organic compound-compliant (VOC Compliance), refers to a system, substance or application that follows government regulations regarding volatile organic compounds. In India, as per NAAQS, only Benzene (C6H6) has been defined since November 2009.
There are three distinct groups of Volatile Organic Compounds (VOCs). These differences are based on the boiling point of each chemical. They include VVOCs (Very Volatile Organic Compounds), VOCs (Volatile Organic Compounds) and SVOCs (Semi-Volatile Organic Compounds). Some chemicals, for example, Formaldehyde & Acetaldehyde more accurately fit within the VVOC grouping, whilst chemicals including Benzene, Toluene and Xylenes fit more accurately within the VOC grouping.
You can get rid of VOCs and let some fresh air into your home by opening a window and doors, using the exhaust fan in your kitchen or bathroom, or having a mechanical ventilator installed and maintained regularly. Heat or energy recovery ventilators remove stale indoor air and pull the same amount of fresh air into your home. This way it decreases the amount of VOC you breathe over time.
As per most of the guidelines a concentration of less than 0.5 mg/m3
